Plumbing is a pipe installation system that has the primary function of providing clean water and as a distributor of water to predetermined areas. Plumbing also has another function: providing a waste disposal system so as not to pollute the environment. Simply put, plumbing is a piping system that must exist in all buildings. The piping system means that it involves all maintenance and installation of every pipe installed. The absence of a plumbing system means no water can flow to all building areas, be it clean water or waste streams for disposal. This is the same as you can not use any water in the house, and all activities can be disrupted.
In the process of installing pipes in a building, several basic principles need to be considered. Implementing these principles is essential so that the pipe structure does not interfere with the construction process and vice versa.
1. Following the Concept of Building Plans
Before laying the pipes, it is essential to look at the construction plan of the building. Looking at the goal of the building will ensure that the installation of the pipes is in the right place. On the other hand, if the installation of the pipes is done carelessly or not based on the plan, there is a high possibility of leakage, and the building structure cannot be as sturdy as it should be. Looking for 24 hour plumber in petaling jaya?
2. Construction Protection
Still related to the first point, improper plumbing can damage the structure of the building. It could be that the building stands, but in the next 2-5 years, all structures will be shaken. So the installation of plumbing must also attach importance to and pay attention to the protection of building construction. To ensure that the building can stand firm, adding sheathing to the areas to be penetrated by the pipe is necessary.
3. Pipe Protection
It is not only the construction structure that must be considered but also the pipes. It’s useless if the building structure is strengthened, but the plumbing system becomes a mess. If this happens, the complex plumbing system will damage the sturdy construction that has been made in such a way.
Thus all efforts of protection were in vain. Therefore, the pipe system that has been installed must also be protected. The coating can protect the pipe by giving a layer of paint or asphalt.
4. Appropriate Equipment
The equipment used in this pipe installation must also be considered. Each building has different characteristics and needs, so all the equipment used differs.
5. Good Installation Planning
Installing the pipe correctly and adequately requires an air outlet. This air outlet is useful to avoid blockages that may occur. A good installation requires installing the valve in the correct position, i.e. depending on the slope of the pipe being installed. For example, if the pipe is on an average slope (flat), the valve installation needs to be slightly tilted and in the direction of the water flow.
6. Exhaust System Planning
It was mentioned earlier that the plumbing system also functions as a waste disposal system. On this principle, the pipe for sewage disposal needs to have a slope equal to or greater than the diameter of the pipe. This is done to ensure that nothing is clogged in the pipe and avoid the risk of flow turbulence.
We understand that the existence of a plumbing system is essential for all buildings. Therefore, choosing suitable pipes or installation of these pipes is important. You can visit the KlopMart website. You can select and order various kinds of water pipe specifications and prices.